Motorola CPCI-6020TM 6U Processor Controller
- Product Code: CPCI-6020TM
- Availability: In Stock
Purchase Attributes：Original, Brand New
Service Attributes
▷ Stock & Logistics：Fast Delivery
▷ After-sales Guarantee：12 Months Warranty
Dimension：233mm H × 160mm W × 20mm D)
Temperature Range: TM = -40 ~ +70℃ wide industrial temp; standard = 0 ~ +55℃ commercial
Motorola CPCI-6020TM 6U Single-Slot CompactPCI Host SBC (MPC7410 PowerPC G4, Hot-Swap Industrial Temp)
Manufacturer: Motorola Embedded, later Emerson Embedded Computing
Model: CPCI-6020TM (TM = Hot Swap + Extended Industrial Temperature Grade)
Series: CPCI-6020 PowerPlus III CompactPCI Host Processor Family
Type: Single-slot 6U PICMG2.0 CompactPCI system master CPU board, PowerPC G4 MPC7410 RISC architecture
Function: Real-time industrial control master node for Honeywell DCS, telecom, railway, military, offshore rack systems; dual independent Ethernet, multi-channel serial, PMC mezzanine expansion, hot-swap support, ECC memory, multi-stage watchdog, battery-backed NVRAM/RTC; compatible with VxWorks, Linux, QNX RTOS
1. Overview
CPCI-6020TM is the industrial rugged hot-swap variant of the CPCI-6020 series, built on Emerson PowerPlus III architecture, single 6U CompactPCI slot form factor. The suffix "TM" stands for Hot Swap compliant + extended wide industrial temperature range, different from standard commercial CPCI-6020.
It adopts low-power MPC7410 PowerPC G4 (500MHz) with AltiVec vector processing unit, paired with dedicated 2MB pipelined burst L2 cache. Supports ECC-protected SDRAM up to 2GB via RAM500 memory mezzanine module, dual-bank onboard Flash firmware, dual independent 10/100Mbps Ethernet controllers, 4 serial channels, 1×64-bit PMC expansion slot, dual Harrier ASIC system bridge, multi-level hardware watchdog timer, and 32KB battery-backed NVRAM + RTC clock.
Fully PICMG2.0 hot-swap compliant, allows online board replacement without powering down the CompactPCI chassis. Widely deployed as primary host controller for legacy Honeywell DCS control racks, telecom signal processing cabinets, offshore platform monitoring systems, railway signal embedded hosts and military rugged computing equipment. Dual PCI bus architecture separates peripheral traffic from CPCI backplane traffic to reduce latency for hard real-time tasks.
2. Full Technical Specifications
• CPU: MPC7410 PowerPC G4 RISC, 500MHz, AltiVec SIMD vector engine, 32KB L1 I / 32KB L1 D cache
• L2 Cache: 2MB synchronous pipelined burst SRAM, parity error detection
• System Memory: ECC SDRAM, max 2GB (128/256/512MB/1GB/2GB via RAM500 mezzanine)
• Firmware Storage: Dual-bank Flash; Bank A: 32MB onboard, Bank B: 1MB expansion Flash socket
• Non-Volatile Memory: 32KB battery-backed M48T37V NVRAM + real-time clock (RTC)
• Network Interfaces: Dual independent 10/100BASE-TX RJ45 Ethernet, separate MAC controllers for network redundancy
• Serial Ports: 2× async RS232/422 console/user ports; 2× configurable async/sync serial channels
• Expansion: 1× 32/64-bit PMC mezzanine slot (VITA 32), front/rear I/O routing via P2 connector
• System Bridge: Dual Harrier ASICs, dual independent PCI buses + 64-bit CPCI bridge DMA burst transfer
• Watchdog & Timers: 3 multi-stage hardware watchdog reset timers, four 32-bit system interval timers
• Front Panel I/O: 8 status LEDs, manual RESET / ABORT pushbuttons, CompactFlash socket, USB 1.1 port
• Hot Swap: Full PICMG2.0 hot-swap compliant (TM model exclusive feature)
• Power Input: +5V / +3.3V CompactPCI backplane; typical consumption 18W, max 26W
• Operating Temp (TM industrial grade): -40℃ ~ +70℃ forced air cooling; commercial standard CPCI-6020 = 0℃ ~ +55℃
• Storage Humidity: 5%–90% RH non-condensing
• Vibration & Shock: NEBS GR-63-CORE compliant, 1G sine sweep 5–200Hz three-axis operating vibration
• Form Factor: Single-slot 6U Eurocard CompactPCI (233mm H × 160mm W × 20mm D)
• Supported RTOS: VxWorks, MontaVista Linux, QNX, LynxOS
3. Key Difference: CPCI-6020TM vs Standard CPCI-6020
1. Temperature Range: TM = -40 ~ +70℃ wide industrial temp; standard = 0 ~ +55℃ commercial
2. Hot Swap: TM fully PICMG2.0 hot-swap enabled; standard version hot-swap optional or disabled
3. Component Grade: TM uses industrial extended-temperature rated semiconductors and passive components
4. Application Target: TM for offshore, military, desert, outdoor harsh environments; standard for indoor factory automation
4. Core Features
• PowerPlus III low-power MPC7410 G4 CPU with AltiVec for high-speed floating-point signal & process calculation
• ECC memory error correction to eliminate data corruption from industrial EMI/electrical noise
• Dual redundant Ethernet ports for fault-tolerant industrial control network communication
• Full hot-swap capability for online maintenance without system shutdown
• Single PMC expansion slot to add custom serial, analog I/O, optical or high-speed network modules
• Dual independent PCI bus architecture isolates peripheral traffic to guarantee real-time determinism
• Multi-stage watchdog auto-reset prevents system deadlock in unattended unmanned control racks
• Wide -40~+70℃ industrial temperature tolerance for extreme field deployment environments
• Dual-bank Flash firmware supports safe field upgrade without bricking the board
5. Industrial Applications
• Honeywell legacy DCS system CompactPCI rack main host controller board
• Offshore oil & gas platform wide-temperature process monitoring master computing node
• Telecom NEBS-compliant signal processing CompactPCI host card
• Military ruggedized embedded real-time control rack CPU module
• Railway central signal cabinet hot-swappable embedded main processor
• Mining, desert outdoor industrial automation heavy-duty real-time controller
Motorola / Emerson © CPCI-6020TM CompactPCI Single Board Computer